Set Chassis Capabilities 命令详情
更新时间：2025/06/26
在Gitcode上查看源码修订记录
| openUBMC版本号 | 修订日期 | 修订人 | 修订内容 |
|---|---|---|---|
| 25.06 | 2025/06/26 | pengqiang-gs | 初稿，新增命令详情 |
基本信息
功能说明
设置机框的各项属性。 This command is used to set the values that will be returned for the Get Chassis Capabilities command into nonvolatile storage associated with the Chassis Device.
权限
BasicSetting
命令信息
请求信息
| 字节顺序 | 域取值说明 |
|---|---|
| 1 | Capabilities Flags [7:2] - reserved [1] - 1b = Provides Front Panel Lockout (see Get Chassis Capabilities) [0] - 1b = Provides intrusion |
| 2 | Chassis FRU Info Device Address (see Get Chassis Capabilities for a description of these addresses, their use, and the field formatting) |
| 3 | Chassis SDR Device Address |
| 4 | Chassis SEL Device Address |
| 5 | Chassis SM Device Address |
| (6) | Chassis Bridge Device Address |
响应信息
| 字节顺序 | 域取值说明 |
|---|---|
| 1 | Completion Code Note, this command does not return an error completion code if an attempt is made to change a ‘read-only’ parameter. Software must check which fields in the response match the value from the request by using the Get Chassis Capabilities command. |
命令样例
样例1：
- 请求：
- 响应：
00