Get SOL Configuration Parameters
更新时间： 2025/06/26
在Gitcode上查看源码22h-获取SOL配置（Get-SOL-Configuration-Parameters）
修订记录
| openUBMC版本号 | 修订日期 | 修订内容 |
|---|---|---|
| 25.06 | 2025/06/26 | 初稿，新增命令详情 |
基本信息
功能说明
获取SOL配置。
权限
ReadOnly
命令信息
请求信息
| 字节顺序 | 域取值说明 |
|---|---|
| NetFn | Transport 0Ch |
| CMD | 22h |
| 1 | [7]-0b=get parameter 1b=get parameter revision only. [6:4]-reserved [3:0]-Channel number. |
| 2 | Parameter selector |
| 3 | Set Selector. Selects a given set of parameters under a given Parameter selector value. 00h if parameter doesn't use a Set Selector. |
| 4 | Block Selector (00h if parameter does not require a block number) |
响应信息
| 字节顺序 | 域取值说明 |
|---|---|
| 1 | Completion Code. Generic codes, plus following command-specific completion code(s): 80h=parameter not supported. |
| 2 | [7:0]-Parameter revision. Format: MSN=present revision. LSN=oldest revision parameter is backward compatible with. 11h for parameters in this specification. |
| The following data bytes are not returned when the 'get parameter revision only' bit is 1b. | |
| 3:N | Configuration parameter data, per Table 8-5, SOL Configuration Parameters If the rollback feature is implemented, the BMC makes a copy of the existing parameters when the 'set in progress' state becomes asserted (See the Set In Progress parameter #0). While the 'set in progress' state is active, the BMC will return data from this copy of the parameters, plus any uncommitted changes that were made to the data. Otherwise, the BMC returns parameter data from non-volatile storage. |
命令样例
获取SOL配置
请求：
ipmicmd -k "0f 00 0c 22 01 00 00 00" smi 0响应：
0f 0d 00 22 00 11 00