Get PEF Configuration Parameters 命令详情
更新时间：2025/06/26
在Gitcode上查看源码修订记录
| openUBMC版本号 | 修订日期 | 修订人 | 修订内容 |
|---|---|---|---|
| 25.06 | 2025/06/26 | pengqiang-gs | 初稿，新增命令详情 |
基本信息
功能说明
查询 PEF 的配置参数以及事件的 strings。 This command is used for retrieving the configuration parameters from the Set PEF Configuration command.
权限
ReadOnly
命令信息
请求信息
| 字节顺序 | 域取值说明 |
|---|---|
| 1 | [7] 1b = get parameter revision only. 0b = get parameter [6:0] - Parameter selector |
| 2 | Set Selector (00h if parameter does not require a Set Selector) |
| 3 | Block Selector (00h if parameter does not require a block number) |
响应信息
| 字节顺序 | 域取值说明 |
|---|---|
| 1 | Completion Code. Generic plus the following command-specific completion codes: 80h = parameter not supported. |
| 2 | [7:0] - Parameter revision. Format: MSN = present revision. LSN = oldest revision parameter is backward compatible with. 11h for parameters in this specification |
| (3:N) | The following data bytes are not returned when the ‘get parameter revision only’ bit is 1b. Configuration parameter data, per PEF Configuration Parameters. If the rollback feature is implemented, the BMC makes a copy of the existing parameters when the ‘set in progress’ state becomes asserted (See the Set In Progress parameter #0). While the ‘set in progress’ state is active, the BMC will return data from this copy of the parameters, plus any uncommitted changes that were made to the data. Otherwise, the BMC returns parameter data from non-volatile storage. |
命令样例
样例1：查询 PEF 的配置参数
- 请求：
- 响应：