Set Fan Level
更新时间： 2025/06/26
在Gitcode上查看源码15h-设置风扇等级（Set-Fan-Level）
修订记录
| openUBMC版本号 | 修订日期 | 修订内容 |
|---|---|---|
| 25.06 | 2025/06/26 | 初稿，新增命令详情 |
基本信息
功能说明
设置风扇等级。
权限
BasicSetting
命令信息
请求信息
| 字节顺序 | 域取值说明 |
|---|---|
| NetFn | PICMG 2Ch |
| CMD | 15h |
| 1 | PICMG Identifier. Indicates that this is a PICMG-defined group extension command. A value of 00h is used. |
| 2 | FRU Device ID. Indicates an individual FRU device to query. |
| 3 | Fan Level. To be accepted, this value is:- greater than or equal to Minimum Speed Level and less than or equal to Maximum Speed Level.- FEh (Shut Down)- FFh (Local Control). |
| (4) | Local Control Enable State[1]. This field is optional. Set this to 0 to disable, or 1 to enable, Local Control mode. |
响应信息
| 字节顺序 | 域取值说明 |
|---|---|
| 1 | Completion Code |
| 2 | PICMG Identifier. Indicates that this is a PICMG-defined group extension command. A value of 00h is used. |
命令样例
设置风扇等级
请求：
ipmicmd -k "0f 00 MM NN" smi 0响应：
0f MM NN