Get FRU LED Properties
更新时间： 2025/06/26
在Gitcode上查看源码05h-获取FRU-LED属性（Get-FRU-LED-Properties）
修订记录
| openUBMC版本号 | 修订日期 | 修订内容 |
|---|---|---|
| 25.06 | 2025/06/26 | 初稿，新增命令详情 |
基本信息
功能说明
获取FRU LED属性。
权限
ReadOnly
命令信息
请求信息
| 字节顺序 | 域取值说明 |
|---|---|
| NetFn | PICMG 2Ch |
| CMD | 05h |
| 1 | PICMG Identifier, Indicates that this is a PICMG defined group extension command. A value of 00h is used |
| 2 | FRU Device ID |
响应信息
| 字节顺序 | 域取值说明 |
|---|---|
| 1 | Completion Code |
| 2 | PICMG Identifier Indicates that this is a PICMG defined group extension command. A value of 00h is used |
| 3 | General Status LED Properties A bit field indicating the FRU's ability to control the four LEDs . When a bit is set, the FRU can control the associated LED Bit LED Name [7:4] Reserved, is set to 0. [3] LED [2] LED 2 [1] LED 1 [0] BLUE LED |
| 4 | Application Specific LED Count The number of application specific LEDs under control of the IPM Controller 00h-FBh Number of application specific LEDs under control by IPM Controller. If no application specific LEDs are present this field is 00h FCh-FFh Reserved |
命令样例
获取FRU LED属性
请求：
ipmicmd -k "0f 00 2c 05 00 00" smi 0响应：
0f 2d 00 05 00 00 04 01