Get User Payload Access 命令详情
更新时间：2025/06/26
在Gitcode上查看源码修订记录
| openUBMC版本号 | 修订日期 | 修订人 | 修订内容 |
|---|---|---|---|
| 25.06 | 2025/06/26 | pengqiang-gs | 初稿，新增命令详情 |
基本信息
功能说明
标准命令，获取具体的用户是否可以在指定的通道上激活负载使能信息。当前命令仅用于 RMCP 会话。 This command returns the user payload enable settings that were set using the Set User Payload Access command.
权限
ReadOnly
命令信息
请求信息
| 字节顺序 | 域取值说明 |
|---|---|
| 1 | Channel Number [7:4] - reserved [3:0] - Channel Number |
| 2 | User ID [7:6] - reserved [5:0] - User ID. 000000b = reserved. |
响应信息
| 字节顺序 | 域取值说明 |
|---|---|
| 1 | Completion Code |
| 2 | Standard Payload enables 1 [7:2] - reserved for standard payloads 2-7 enabled/disabled state [1] 1b = standard payload 1 enabled (SOL) 0b = standard payload 1 disabled [0] - reserved |
| 3 | Standard Payload Enables 2 - reserved |
| 4 | OEM Payload Enables 1. For each bit: 1b = payload enabled 0b = payload disabled [7] - OEM Payload 7 enabled/disabled [6] - OEM Payload 6 enabled/disabled [5] - OEM Payload 5 enabled/disabled [4] - OEM Payload 4 enabled/disabled [3] - OEM Payload 3 enabled/disabled [2] - OEM Payload 2 enabled/disabled [1] - OEM Payload 1 enabled/disabled [0] - OEM Payload 0 enabled/disabled |
| 5 | OEM Payload Enables 2 - reserved |
命令样例
样例1：获取用户2在通道1上的激活负载使能
- 请求：
- 响应：