Set Session Privilege Level 命令详情
更新时间：2025/06/26
在Gitcode上查看源码修订记录
| openUBMC版本号 | 修订日期 | 修订人 | 修订内容 |
|---|---|---|---|
| 25.06 | 2025/06/26 | pengqiang-gs | 初稿，新增命令详情 |
基本信息
功能说明
标准命令，设置会话的权限等级。 This command is sent in authenticated format. When a session is activated, the session is set to an initial privilege level.
权限
ReadOnly
命令信息
请求信息
| 字节顺序 | 域取值说明 |
|---|---|
| 1 | Requested Privilege Level [7:4] - reserved [3:0] - Privilege Level 0h - no change, just return present privilege level 1h - reserved 2h - change to USER level 3h - change to OPERATOR level 4h - change to ADMINISTRATOR level 5h - change to OEM Proprietary level all other = reserved |
响应信息
| 字节顺序 | 域取值说明 |
|---|---|
| 1 | Completion Code. Generic, plus following command specific: 80h = Requested level not available for this user 81h = Requested level exceeds Channel and/or User Privilege Limit 82h = Cannot disable User Level authentication |
| 2 | New Privilege Level (or present level if ‘return present privilege level’ was selected.) |
命令样例
样例1：设置当前会话权限
- 请求：
ipmitool raw 0x06 0x3B - 响应：