Get BT Interface Capabilities 命令详情
更新时间：2025/06/26
在Gitcode上查看源码修订记录
| openUBMC版本号 | 修订日期 | 修订人 | 修订内容 |
|---|---|---|---|
| 25.06 | 2025/06/26 | pengqiang-gs | 初稿，新增命令详情 |
基本信息
功能说明
标准命令，获取系统接口是否支持 multi-part 传输以及传输的大小规格。 This command can be used to determine whether the SSIF supports multi-part transactions, and what size of IPMI messages can be transferred.
权限
ReadOnly
命令信息
请求信息
| 字节顺序 | 域取值说明 |
|---|---|
| 1 | System Interface Type [7:4] - reserved [3:0] - System Interface Type (For BT use the Get BT Interface Capabilities command) 0h = SSIF 1h = KCS 2h = SMIC all other = reserved |
响应信息
| 字节顺序 | 域取值说明 |
|---|---|
| 1 | Completion Code |
| 2 | Reserved. Returned as 00h. |
| 3 | [7:6] - Transaction support 00b = only single-part reads/writes supported. 01b = multi-part reads/writes supported. Start and End transactions only. 10b = multi-part reads/writes supported. Start, Middle, and End transactions supported. 11b = reserved. [5:4] - reserved. [3] - PEC support. 1b = implements PEC. BMC will start using PEC in read transactions after it receives any SSIF write transaction that includes a valid PEC. The BMC ceases using PEC if it receives an SSIF write transaction that does not include PEC. 0b = does not support PEC. Note that a BMC implementation may reject write transactions that include a PEC byte. [2:0] - SSIF Version 000b = version 1 (version defined in this specification). |
| 4 | Input message size in bytes. (1 based.) Number of bytes of IPMI message data that the BMC can accept. This number does not include slave address, SMBus length, PEC, or SMBus CMD bytes, just the IPMI message data. A BMC that just supports single-part writes would return 32 (20h) for this value. A BMC that supports multi-part Start and End would return a value from 33 to 64. A BMC that supports multi-part with Middle transactions would return a value from 65 to 255. |
| 5 | Output message size in bytes. (1 based.) Maximum number of bytes of IPMI message data that can be read from the BMC. This number does not include slave address, SMBus length, PEC, SMBus CMD bytes, special bytes (such as the special bytes following the length byte in the multi-part read middle and end transactions) just the IPMI message data. A BMC that just supports single-part reads would return 20h (32) for this value. A BMC that supports multi-part Start and End would return a value from 33 to 62 (the reason this is 62 instead of 64 is that there are two special bytes after the length byte.) A BMC that supports multi-part with Middle transactions would return a value from 63 to 255. |
命令样例
样例1：获取系统接口规格
- 请求：
- 响应：