Set PEF Configuration Parameters
更新时间： 2025/06/26
在AtomGit上查看源码12h — Set PEF Configuration Parameters
Change History
| openUBMC Version | Revision Date | Author | Description |
|---|---|---|---|
| 25.06 | 2025/06/26 | pengqiang-gs | Initial draft, add command details |
Basic Information
Function Description
Sets PEF configuration parameters and event strings.
Privilege
ReadOnly
Command Information
Request Information
| Byte | Data Field |
|---|---|
| 1 | Parameter selector [7] - reserved [6:0] - Parameter selector |
| 2 | Configuration parameter data, per PEF Configuration Parameters. |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code. Generic plus the following command-specific completion codes: 80h = parameter not supported. 81h = attempt to set the 'set in progress' value (in parameter #0) when not in the 'set complete' state. (This completion code provides a way to recognize that another party has already 'claimed' the parameters) 82h = attempt to write read-only parameter 83h = attempt to read write-only parameter |
Command Examples
Example 1: Set PEF Configuration Parameters
- Request:
- Response: