get VMA network
更新时间： 2026/08/06
在AtomGit上查看源码get VMA network
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
This interface is used to query a VMA network.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 97h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command=0x0ch: queries the VMA network. |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| data | 5:8 CMC IP address 9:12 CMC submask 13:16 CMC Gateway IP 17:20 VMA IP address 21:24 VMA submask 25:28 VMA Gateway IP |
Command Example
Query the VMA network.
Request:
bash
ipmicmd -k "0f 00 30 97 db 07 00 0c" smi 0Response:
text
0f 31 00 97 00 db 07 00 * * * * * * * * * * * * * * * * * * * * * * * *This example assumes command success (completion code 00). Each * represents one returned byte; consecutive four-byte groups are the CMC address, mask, and gateway, followed by the VMA address, mask, and gateway.