Get SSO User Secondary Authentication Result
更新时间： 2026/08/06
在AtomGit上查看源码Get SSO User Secondary Authentication Result
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
This interface is used to obtain the level-2 authentication result of an SSO user.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 94h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, sub command = 3Ch |
| 5 | Reserved. The value is 0. |
| 6 | SSO Session ID Length (N) |
| 7:N | SSO session ID. |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code 0x80: being verified |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 5 | Authentication Result 0: success 1- unknown error 2- The user name or password is incorrect. 3- The user is locked. 4- The password has expired. |
Command Example
Obtain the level-2 authentication result of the SSO user.
Request:
bash
ipmicmd -k "0f 00 30 94 db 07 00 3c 00 18 30 31 32 33 34 35 36 37 38 39 61 62 63 64 65 66 30 31 32 33 34 35 36 37" smi 0Response:
text
0f 31 00 94 00 db 07 00 *The example response assumes successful command execution (completion code 00). Queries the 24-byte ASCII session ID 0123456789abcdef01234567, assuming it exists; * is the one-byte authentication result.