Set age test process rate
更新时间： 2026/08/06
在AtomGit上查看源码Set age test process rate
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
This command is used to obtain the aging test progress.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 92h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, sub command=34h |
| 5:8 | memory age test process rate, LS-byte first |
| 9:12 | hard disk age test process rate, LS-byte first |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
Command Example
Request:
bash
ipmicmd -k "0f 00 30 92 db 07 00 34 00 00 00 00 00 00 00 00" smi 0Response:
text
0f 31 00 92 00 db 07 00This example assumes command success (completion code 00). The request sets both memory and disk aging-test progress to zero, using four little-endian bytes for each.