Set Loadline State
更新时间： 2026/08/06
在AtomGit上查看源码Set Loadline State
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
This command is used to enable or disable the loadline function.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 90h |
| 1 | Sub command, sub command=5Ch |
| 2 | 0: CSD is disabled. 1: CSD is enabled. |
| 3 | 0: Set the volume. 1: The ENS queries for resource records in the common view. |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Algorithm Enabling Status |
Command Example
Request:
bash
ipmicmd -k "0f 00 30 90 5c 00 01" smi 0Response:
text
0f 31 00 90 00 *Example assuming command execution succeeds (completion code 00). The request selects query mode (01); the switch input is 00. The * is the one-byte current switch state after the completion code; the response table numbers this payload byte as 1.