2.235.1.1.34.50.1 syslogInfoDescriptionEntry
更新时间： 2026/06/18
在Gitcode上查看源码2.235.1.1.34.50.1 syslogInfoDescriptionEntry
Revision History
| openUBMC Version | Revision Date | Revision Content |
|---|---|---|
| 26.06 | 2026/06/18 | Auto-generated SNMP branch documentation |
Node Overview
- MIB module: OPENUBMC-SERVER-MIB
- Node name:
syslogInfoDescriptionEntry - Relative OID:
2.235.1.1.34.50.1 - Full OID:
1.3.6.1.4.1.2011.2.235.1.1.34.50.1 - Node type: OBJECT-TYPE
- Access: not-accessible
- Status: current
- MIB definition:
syslogInfoDescriptionTable 1
Description
Information about a syslog group.
Object Definitions
Scalar objects and notifications defined under this node.
syslogReceiverIndex
- Relative OID:
2.235.1.1.34.50.1.1 - Full OID:
1.3.6.1.4.1.2011.2.235.1.1.34.50.1.1 - Type: OBJECT-TYPE
- Data type:
INTEGER(1..4) - Access: not-accessible
- Status: current
- MIB definition:
syslogInfoDescriptionEntry 1
syslogReceiverEnable
- Relative OID:
2.235.1.1.34.50.1.2 - Full OID:
1.3.6.1.4.1.2011.2.235.1.1.34.50.1.2 - Type: OBJECT-TYPE
- Data type:
INTEGER { disable(1), enable(2) } - Access: read-write
- Status: current
- MIB definition:
syslogInfoDescriptionEntry 2 - Description: Syslog Receiver state enable 2, disable 1.
syslogReceiverAddress
- Relative OID:
2.235.1.1.34.50.1.3 - Full OID:
1.3.6.1.4.1.2011.2.235.1.1.34.50.1.3 - Type: OBJECT-TYPE
- Data type:
DisplayString - Access: read-write
- Status: current
- MIB definition:
syslogInfoDescriptionEntry 3 - Description: Syslog Receiver IP addrsss. Default value is empty.
syslogReceiverPort
- Relative OID:
2.235.1.1.34.50.1.4 - Full OID:
1.3.6.1.4.1.2011.2.235.1.1.34.50.1.4 - Type: OBJECT-TYPE
- Data type:
INTEGER - Access: read-write
- Status: current
- MIB definition:
syslogInfoDescriptionEntry 4 - Description: Syslog port.
syslogSendLogType
- Relative OID:
2.235.1.1.34.50.1.5 - Full OID:
1.3.6.1.4.1.2011.2.235.1.1.34.50.1.5 - Type: OBJECT-TYPE
- Data type:
DisplayString - Access: read-write
- Status: current
- MIB definition:
syslogInfoDescriptionEntry 5 - Description: The log type of syslog send. Support set/get any combination of the 3 log type(OperationLogs,SecurityLogs,EventLogs), use comma to separate them. none/all is also supported,but never use it with the 3 log types together. e.g. To set OperationLogs + SecurityLogs log type message, just set: OperationLogs,SecurityLogs To set EventLogs message, just set: EventLogs To set none level message, just set: none To set all level message, just set: all
syslogReceiverTest
- Relative OID:
2.235.1.1.34.50.1.6 - Full OID:
1.3.6.1.4.1.2011.2.235.1.1.34.50.1.6 - Type: OBJECT-TYPE
- Data type:
INTEGER - Access: read-write
- Status: current
- MIB definition:
syslogInfoDescriptionEntry 6 - Description: Test the syslog. When set, the value is only 1.