Set Port State
更新时间： 2026/08/06
在AtomGit上查看源码Set Port State
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
Shows the port status.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | PICMG 2Ch |
| CMD | 0Eh |
| 1 | PICMG Identifier, Indicates that this is a PICMG-defined group extension command. A value of 00h is used |
| 2:5 | Link Info, LS Byte first. Describes the Link that should be enabled or disabled. [31:24]-Link Grouping ID [23:20]-Link Type Extension [19:12]-Link Type [11]-Port 3 Bit Flag [10]-Port 2 Bit Flag [09]-Port 1 Bit Flag [08]-Port 0 Bit Flag [07:06]-Interface [05:00]-Channel Number |
| 6 | State, Indicates the desired state of the Link as described by Link Info. 00h=Disable 01h=Enable All other values reserved |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2 | PICMG Identifier, Indicates that this is a PICMG-defined group extension command A value of 00h is used |
Command Example
Set the port status.
Request:
bash
ipmicmd -k "0f 00 MM NN" smi 0Response:
text
0f MM NN