Obtain the sensor alarm status
更新时间： 2026/08/06
在Gitcode上查看源码Obtain the sensor alarm status
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
Obtains the sensor alarm status.
Privilege
ReadOnly
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 32h |
| CMD | B1h |
| 1 | Fru id |
| 2:3 | Fru type 0x0002: control board 0x0004 BBU 0x0001 Interface Card (CST0221V6) |
| 4 | Device id |
| 5 | Sdr type 0x1: temperature 0x2 voltage |
| 6 | Need num |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:(need_num*4+1) | Sensor alarm state |
Command Example
Obtain the sensor alarm status.
Request:
bash
ipmitool raw 0x32 0xb1 0x00 0x02 0x00 0x00 0x01 0x10Response:
text
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00