Set expander mode Command
更新时间： 2026/08/06
在Gitcode上查看源码Set expander mode Command
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
Sets the extender mode.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 97h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, subcommand = 04h |
| 5 | Parameter selector |
| 6:N | Configuration parameter data |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code 80h=parameter not supported 81h=attempt to set the 'set in progress' value (in parameter #0) when not in the 'set complete' state. (This completion code provides a way to recognize that another party has already 'claimed' the parameters.) 82h=attempt to write read-only parameter |
| 2: 4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
Command Example
Set the extender mode.
Request:
bash
ipmicmd -k "0f 00 MM NN" smi 0Response:
text
0f MM NN