Set VLAN IP
更新时间： 2026/08/06
在AtomGit上查看源码Set VLAN IP
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
Set an IP address for the VLANIF interface of the XCU board.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, sub command = 0ah |
| 5:8 | IpAddr |
| 9:12 | Netmask |
| 13:16 | VlanID |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code (00h)Succeed (C9h)Invalid VlanID (CCh)Invalid IpAddr or Netmask (CEh)Command response could not be provided. |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
Command Example
Set the IP address of the VLANIF interface on the XCU.
Request:
bash
ipmicmd -k "0f 00 MM NN" smi 0Response:
text
0f MM NN