SSO User Secondary Authencation Request
更新时间： 2026/08/06
在Gitcode上查看源码SSO User Secondary Authencation Request
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
Indicates the SSO user-assisted authentication request.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 94h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, subcommand=3Bh |
| 5 | user type: 0- local user only 1- domain user |
| 6 | Reserved. The value is 0. |
| 7 | [7:1]: reserved [0]: cascading flag 0: last data 1: middle data |
| 8:9 | Offset of the written data. The value starts from 0 (LS byte first). Write data in sequence when they are written as multiple frames. |
| 10 | Length: length of the data to be written. |
| 11:N | Data to write data1:1 indicates the SSO session ID length (N). data2: N-SSO session ID data (N+1):1 indicates the SSO user name length (M). data (N+2): M-SSO user name data (N+M+1):1 indicates the SSO user password length L. data (N+M+2): L-SSO user password |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
Command Example
SSO user-assisted authentication request.
Request:
bash
ipmicmd -k "0f 00 MM NN" smi 0Response:
text
0f MM NN