Get Stateless Compute Parameter
更新时间： 2026/08/06
在Gitcode上查看源码Get Stateless Compute Parameter
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
Obtains stateless computing parameters.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 94h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, subcommand = 22h |
| 5 | Parameter selector, starting from 1. For details, see Table 1. |
| 6 | Set Selector. Selects a given set of parameters under a given Parameter selector value. 00h if parameter doesn't use a Set Selector |
| 7 | Indicates the read offset. The value starts from 0. |
| 8 | Length: read length. |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 5 | End of List, indicating whether the current data is complete. Long data may need to be read multiple times. This field is used to check whether data is completely read. [7:1]reserved [0]: cascading flag 0: last data 1: middle data |
| 6:N | Indicates the data. The returned data may be less than or equal to the read length. |
Command Example
Obtain stateless computing parameters.
Request:
bash
ipmicmd -k "0f 00 MM NN" smi 0Response:
text
0f MM NN