Set FC portconnect
更新时间： 2026/08/06
在Gitcode上查看源码Set FC portconnect
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2026/08/06 | Initial draft: add command details |
Basic Information
Function Description
Set up a Fibre Channel port connection.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, subcommand = 07h |
| 5 | Indicates the FC port ID. If the value is 0xff, all ports are returned. |
| 6 | Fibre Channel Port Connection Configuration 0h=left 1h=right |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code (00h)Succeed (C9h)Invalid parameter for unsupported component (CCh)Invalid data field for unsupported component |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
Command Example
Set the FC port connection.
Request:
bash
ipmicmd -k "0f 00 MM NN" smi 0Response:
text
0f MM NN