Get Switch Info Parameters Command
更新时间： 2026/08/06
在Gitcode上查看源码Get Switch Info Parameters Command
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
Obtain component information.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 94h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, subcommand = 02h |
| 5 | Parameter selector |
| 6 | Set Selector Selects a given set of parameters under a given Parameter selector value. 00h if parameter doesn't use a Set Selector |
| 7 | Block Selector (00h if parameter does not require a block number,16Bytes Per block) |
| 8 | Sub Block Selector (00h if parameter does not require a block number,16Bytes Per block) |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code Generic codes, plus following command-specific completion code(s): 80h=parameter not supported. 83h=no more data 84h=not support information inquiry, because the DAC cable inserted. |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 5:N | Configuration parameter data |
Command Example
Obtain component information.
Request:
bash
ipmicmd -k "0f 00 MM NN" smi 0Response:
text
0f MM NN