Set Trusted Computing Configuration
更新时间： 2026/08/06
在AtomGit上查看源码Set Trusted Computing Configuration
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
Sets trusted computing. Currently, only specific models and versions support this command.
Privilege
UserMgmt
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 93h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, sub command=89h |
| 5 | Function. For details about the function ID, see Table 1. |
| 6 | Reserved |
| 7 | Reserved |
| 8 | Data length N |
| 9:N | Data. For details about the parameters, see Table 2. |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
Command Example
Enable the basic secure running capability.
Request:
bash
ipmitool raw 0x30 0x93 0xdb 0x07 0x00 0x89 0x02 0x00 0x00 0x01 0x01Response:
text
db 07 00