Get LDAP Configuration
更新时间： 2026/08/06
在Gitcode上查看源码Get LDAP Configuration
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
Query LDAP attributes.
Privilege
ReadOnly
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 93h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, sub command=84h |
| 5 | ControllerId: LDAP controller ID |
| 6 | GroupId: LDAP group ID, which can be ignored when controller attributes are set. |
| 7 | Parameter Selector. The function number is the same as that in LDAP attribute table 1. |
| 8 | Offset of the read data, starting from 0. |
| 9 | Length: read length |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 5 | End of list, indicating whether the data reading is complete. Long data may need to be read multiple times. This field is used to check whether data is completely read. [7:1]: reserved. [0]: End of list. The options are as follows: 0: The current frame is the last frame. 1: The current frame is not the last frame. |
| 6:N | Data. The length of the returned data may be less than or equal to the read length. |
Command Example
Query ports on controller 1.
Request:
bash
ipmitool raw raw 0x30 0x93 0xdb 0x07 0x00 0x84 0x01 0x01 0x01 0x00 0x02Response:
text
db 07 00 00 02 58