Check whether the cache package to take effect exists
更新时间： 2026/08/06
在AtomGit上查看源码Check whether the cache package to take effect exists
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
Check whether there are cache packages to take effect.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 93h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command. Sub command=5bh |
| 5 | Component to Be Queried 0x00: BIOS |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code D6- indicates that the command is not registered with the BMC and is not supported. |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 5 | Whether there are cache packets waiting to take effect. The value is returned based on Byte5. 0x00: There is no cache package to take effect for the corresponding component. 0x01: The cache package of the corresponding component is available. |
Command Example
Obtain the CPU level.
Request:
bash
ipmicmd -k "0f 00 MM NN" smi 0Response:
text
0f MM NN