File Upload
更新时间： 2026/08/06
在Gitcode上查看源码File Upload
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
Upload a file.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 93h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, sub command=69h |
| 5 | File resource ID. For details, see Table 1. |
| 6 | Reserved extended field. Set it to 0. |
| 7 | Operations: 00h Write Prepare 01h Write Data 03h Write Finish |
| 8 | Data length of the current frame. |
| 9:12 | Transfer different data based on the operation phase. Write Prepare: Input file size Write Data: Offset of the input data. The value starts from 0. LSB first Write data in sequence when they are written as multiple frames. Write Finish: Input checksum length. The verification value is the verification value for the entire file content after the file transfer is complete. It is not the verification value of the frame data. |
| 13:N | Data |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
Command Example
Upload a file.
Request:
bash
ipmicmd -k "0f 00 MM NN" smi 0Response:
text
0f MM NN