Get Hdd Power Status
更新时间： 2026/08/06
在Gitcode上查看源码Get Hdd Power Status
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
Shows the power status of hard disks.
Privilege
ReadOnly
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 93h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, sub command=62h |
| 5 | 0: The previous value is a reserved value. In this case, the hard disk location is not distinguished. 1: Front hard disk backplane 2: Rear hard disk backplane |
| 6 | Reserved parameter. The value is 0. |
| 7 | Number of a hard disk. |
| 8 | Reserved parameter. The value is 0. |
Response Information
Command Example
Query the power status of a hard disk.
Request:
bash
ipmicmd -k "0f 00 30 93 db 07 00 62 00 00 00 00" smi 0Response:
text
0f 31 00 93 cb