Get Firmware Firewall
更新时间： 2026/08/06
在Gitcode上查看源码Get Firmware Firewall
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
This command is used to obtain the firewall status.
Privilege
SecurityMgnt
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 93h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, sub command=4ch |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 5 | Firewall Status 0: The firewall is disabled. 1: The firewall is enabled. |
| 6 | Btye5: This field is returned when the value of status is 1. 0: blacklist 1: whitelist Btye5: When the value of status is 0, the value of this field is 0xff. 0xff: invalid mode |
Command Example
Obtain the firewall status.
Request:
bash
ipmitool raw 0x30 0x93 0xdb 0x07 0x00 0x4cResponse:
text
db 07 00 00 ff