Set User SNMP V3 Privacy Password
更新时间： 2026/08/06
在Gitcode上查看源码Set User SNMP V3 Privacy Password
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
Configure the SNMPv3 password.
Privilege
ConfigureSelf
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 93h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, subcommand = 44h |
| 5 | User ID |
| 6 | Operation 00b=set password |
| 7 | Length: indicates the password length. |
| 8:N | Password data, containing a maximum of 20 characters. |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code 80h=(mandatory) password test failed. Password size correct, but password data does not match stored value. 81h=(mandatory) password test failed. Wrong password size was used. |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
Command Example
Set the SNMPv3 password.
Request:
bash
Request:
ipmicmd -k "0f 00 MM NN" smi 0
Response:
0f MM NN