Set Local User password complexity check Enable
更新时间： 2026/08/06
在Gitcode上查看源码Set Local User password complexity check Enable
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
This command is used to set the password complexity parameters.
Privilege
SecurityMgnt
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 93h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, sub command = 0x22h |
| 5 | Local User password complexity check Enable: 00h-Disable 01h-Enable reversibly, can be disabled again 02h-Enable irreversibly, cannot be disabled again Other-Reserved |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
Command Example
Set the password complexity parameters.
Request:
bash
ipmitool raw 0x30 0x93 0xDB 0x07 0x00 0x22 0x01Response:
text
db 07 00