Get Local User password complexity check Enable
更新时间： 2026/08/06
在Gitcode上查看源码Get Local User password complexity check Enable
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
This command is used to query the password complexity configuration.
Privilege
ReadOnly
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 93h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, sub command = 0x21h |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 5 | Local User password complexity check Enable: 00h-Disable 01h-Enable reversibly, can be disabled again 02h-Enable irreversibly, cannot be disabled again Other-Reserved |
Command Example
Query the password complexity configuration.
Request:
bash
ipmitool raw 0x30 0x93 0xDB 0x07 0x00 0x21Response:
text
db 07 00 01