Set Kinescope Bits
更新时间： 2026/08/06
在Gitcode上查看源码Set Kinescope Bits
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
This interface is used to set the condition for triggering recording playback.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 93h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, sub command=0x19h |
| 5 | KVM Kinescope Trigger Mask Bits [7:3]=Reserved. Write as 0000 0b [2]=1-Bit in Byte 6 of command will afffect the Host Multi State bit [1]=1-Bit in Byte 6 of command will afffect the Host CAT ERROR bit [0]=1-Bit in Byte 6 of command will afffect the Host No Signal bit |
| 6 | KVM Kinescope Trigger Set Bits [7:3]=Reserved. Write as 0000 0b [2]=1-Host Multi State Enable 0-Host Multi State Disable [1]=1-Host CAT ERROR Enable 0-Host CAT ERROR Disable [0]=1-Host No Signal Enable 0-Host No Signal Disable |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
Command Example
Set the condition for triggering video play.
Request:
bash
ipmicmd -k "0f 00 MM NN" smi 0Response:
text
0f MM NN