Get Kinescope Bits
更新时间： 2026/08/06
在Gitcode上查看源码Get Kinescope Bits
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
This interface is used to obtain the condition for triggering recording playback.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 93h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, sub command=0x18h |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 5 | KVM Kinescope Trigger Set Bits [7:3]=Reserved. Write as 0000 0b [2]=1-Host Multi State Enable 0-Host Multi State Disable [1]=1-Host CAT ERROR Enable 0-Host CAT ERROR Disable [0]=1-Host No Signal Enable 0-Host No Signal Disable |
Command Example
Obtain the condition for triggering video playback.
Request:
bash
ipmicmd -k "0f 00 MM NN" smi 0Response:
text
0f MM NN