Set Service Configuration
更新时间： 2026/08/06
在Gitcode上查看源码Set Service Configuration
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
This command is used to set the service configuration.
Privilege
SecurityMgnt
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 93h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, sub command = 0Fh |
| 5 | Service ID. See Table 1. |
| 6 | Service parameter. For details, see Table 2. |
| 7 | [7:1]: reserved [0]: cascading flag 0: last data 1: middle data |
| 8 | Offset, indicating the offset of the written data. The value starts from 0. Write data in sequence when they are written as multiple frames. |
| 9 | Length: indicates the length of the written data. |
| 10:N | Written data |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
Command Example
Set the SSH port number to 22.
Request:
bash
ipmitool raw 0x30 0x93 0xDB 0x07 0x00 0x0f 0x02 0x02 0x00 0x00 0x00 0x01 0x16 0x00Response:
text
db 07 00