Set User Group Configuration
更新时间： 2026/08/06
在Gitcode上查看源码Set User Group Configuration
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
This command is used to set user group configuration.
Privilege
UserMgnt
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 93h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, sub command = 0Dh |
| 5 | group id |
| 6 | configuration type 0 group name 1 group privilege 2 privilege mask 3 ldap dn 4 access rule. Each bit represents a rule. The least significant bit represents rule 1, and so on. If the bit value is 1, the corresponding rule is applied. |
| 7 | [7:1]: reserved [0]: cascading flag 0: last data 1: middle data |
| 8 | Offset, indicating the offset of the written data. The value starts from 0. Write data in sequence when they are written as multiple frames. |
| 9 | Length: indicates the length of the written data. |
| 10:N | Written data |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
Command Example
Set the group name of user group 0 to Bmc.
Request:
bash
ipmitool raw 0x30 0x93 0xdb 0x07 0x00 0x0d 0x00 0x00 0x00 0x0 0x03 0x42 0x6d 0x63Response:
text
db 07 00