Get User Group Configuration
更新时间： 2026/08/06
在Gitcode上查看源码Get User Group Configuration
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
This command is used to query user group configuration.
Privilege
ReadOnly
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 93h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, sub command = 0Ch |
| 5 | group id |
| 6 | configuration type 0 group name 1 group privilege 2 privilege mask 3 ldap dn 4 access rule. Each bit represents a rule. The least significant bit represents rule 1, and so on. If the bit value is 1, the corresponding rule is applied. |
| 8 | Read offset, starting from 0. |
| 9 | Length: read length. |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 5 | End of List, indicating whether the current data is complete. Long data may need to be read multiple times. This field is used to check whether data is completely read. [7:1]: reserved [0]: End of list 0=last data 1=middle data |
| 6:N | Indicates the data. The returned data may be less than or equal to the read length. |
Command Example
Query user group configuration.
Request:
bash
ipmitool raw 0x30 0x93 0xdb 0x07 0x00 0x0c 0x00 0x00 0x0 0xffResponse:
text
db 07 00 00 42 6d 63