Set Web Auth Code
更新时间： 2026/08/06
在AtomGit上查看源码Set Web Auth Code
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
Set the web authentication code.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 93h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, sub command = 0Bh |
| 5 | End of List, indicating whether the current data is complete. Set multiple times if the data amount is large. Indicates whether the data transmission is complete. [7:1]: User Privilege 3=operator 4=administrator [0]: End of list 0=last data 1=middle data |
| 6 | Offset: indicates the offset of the authentication code. The value is 0 Base. |
| 7 | Length: length of the transferred data. |
| 8:N | Data |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
Command Example
Obtain the highest event severity of sensor 0.
Request:
bash
ipmicmd -k "0f 00 MM NN" smi 0Response:
text
0f MM NN