Set Bios Boot Info
更新时间： 2026/08/06
在Gitcode上查看源码Set Bios Boot Info
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
Set BIOS information.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 92h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Subcommand.subcommand=5Dh |
| 5 | BIOS ID: This parameter is reserved for multi-host scenarios. In single-host scenarios, this parameter has a fixed value of 0. |
| 6 | Type of the boot information to be set: 1: StartOption 2: StartOptionFlag 3: sets the BIOS full print switch flag (BiosPrintFlag). 4: Boot mode switch (BiosBootModeSw) 5: indicates the boot mode BiosBootMode. This command is used for x86 servers (UEFI or Legacy mode) and is not used for ARM servers (fixed at UEFI). 8: SystemStartupState 9: StartOptionFlagExt 10: sets the switch for displaying the boot mode over the IPMI port. The value 0 indicates that the switch is not displayed, and the value 1 indicates that the switch is displayed. |
| 7 | Sets the length of information. |
| 8:N | Configure Merge Request |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
Command Example
Request:
bash
ipmicmd -k "0f 00 MM NN" smi 0Response:
text
0f MM NN