Get age test result
更新时间： 2026/08/06
在Gitcode上查看源码Get age test result
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
This command is used to obtain the aging test progress.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 92h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, sub command=36h |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 5 | age test result 0: pass 1: fail 2: age test not complete 3: age test flag cleared manually |
| 6 | byte5=0 reserved byte5=1 0: memory age test failed 1: hard disk age test failed |
| 7:24 (18 bytes) | Age test failed position (position where the aging test fails, that is, the rank position of the memory chip or hard disk) LS-byte first The UINT64---- corresponds to a hard disk error or a memory DQ error of the first channel of the memory. UINT8----- indicates the ECC Dq error of the first channel of the memory. The UINT64----- corresponds to the memory DQ error of the second channel of the memory. The UINT8----- corresponds to the ECC Dq error of the second channel of the memory. |
Command Example
Request:
bash
ipmicmd -k "0f 00 MM NN" smi 0Response:
text
0f MM NN