Set NetCard Port Status
更新时间： 2026/08/06
在Gitcode上查看源码Set NetCard Port Status
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
This command is used to set the LOM port status.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 92h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, subcommand = 28h |
| 5 | NetCard Type Network adapter type 1: LOM NCSI TYPE, indicates that the LOM is integrated with the mainboard. 5: LOM2 NCSI TYPE, onboard NIC daughter card. The NIC is an independent card. 9: mezz (reserved) |
| 6 | NIC location: slot ID. If the value of NetCard Type is 1, this parameter is invalid. The default value is 0. |
| 7 | Port ID Network interface ID |
| 8 | Status 0: disabled 1: enabled |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
Command Example
Enable the LOM whose port ID is 1.
Request:
bash
ipmicmd -k "0f 00 MM NN" smi 0Response:
text
0f MM NN