Get Firmware Info Properties
更新时间： 2026/08/06
在AtomGit上查看源码Get Firmware Info Properties
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
Obtains firmware properties.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 91h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, sub command=1Eh |
| 5 | FRU Device ID |
| Note: This command is added to enable the interface module to dynamically display versions based on product attributes. The interface module sends this command to query the firmware version supported by the FRU, obtains the corresponding version information based on the firmware version supported by the FRU, and outputs the version information. This command is used together with the Read Version Data command. |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 5:8 | Supported Firmware Mask Each bit represents a class of firmware Firmware are defined inRead Version Data |
Command Example
Obtain component information.
Request:
bash
ipmicmd -k "0f 00 MM NN" smi 0Response:
text
0f MM NN