Get System Health Event
更新时间： 2026/08/06
在Gitcode上查看源码Get System Health Event
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
This command is used to obtain the system health events.
Privilege
ReadOnly
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 91h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, subcommand=09h |
| 5:6 | Event Record ID, LS Byte first |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 5:6 | Next Record ID, LS Byte first |
| 7:22 | SEL Record: event data that meets the SEL format definition |
Command Example
Obtain system health events.
Request:
bash
ipmicmd -k "0f 00 30 91 db 07 00 09 00 00" smi 0Response:
text
0f db 07 00 02 00 01 00 02 da 7d 76 38 20 00 04 0a 5d 08 00 ff ff