Get System Health
更新时间： 2026/08/06
在Gitcode上查看源码Get System Health
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
This command is used to obtain the system health status.
Privilege
ReadOnly
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 91h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. , vendor ID |
| 4 | Sub command, subcommand=08h |
| 5* | Specifies the FRU ID. This parameter is optional. |
| Note: The asterisk (*) is an optional parameter. If this parameter is not specified, FRU0 is used by default. |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 5 | Minor Event count |
| 6 | Major Event count |
| 7 | Critical Event count |
Command Example
Obtain the system health status.
Request:
bash
ipmicmd -k "0f 00 30 91 db 07 00 08" smi 0Response:
text
0f db 07 00 00 05 00