Dft Get System Health Event
更新时间： 2026/08/06
在Gitcode上查看源码Dft Get System Health Event
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
DFT: obtains the system running status event.
Privilege
ReadOnly
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | 30h |
| CMD | 90h |
| 1:3 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 4 | Sub command, sub command = 2Bh |
| 5:6 | Event Record ID, LS Byte first The alarm ID starting from 0 cannot be greater than the total number of alarms. |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code |
| 2:4 | Manufacturer ID, LS Byte first. The length is fixed to three bytes. For example, if the vendor ID is 2011 and the corresponding hexadecimal value is 0x0007DB, the first byte is DBh, the second byte is 07h, and the third byte is 00h. |
| 5:6 | Next Record ID,LS Byte first |
| 7:22 | SEL record: event data in the SEL format. |
Command Example
Dft Obtain the system running status event.
Request:
bash
ipmicmd -k "0f 00 30 90 db 07 00 2b 00 00" smi 0Response:
text
0f 31 00 90 00 db 07 00 ff ff 01 00 02 39 00 00 00 20 00 04 02 13 01 52 6c 82