Set Chassis Capabilities
更新时间： 2026/08/06
在Gitcode上查看源码Set Chassis Capabilities
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
Set the chassis function.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | Chassis 00h |
| CMD | 05h |
| 1 | Capabilities Flags [7:2]- reserved [1]- 1b=Provides Front Panel Lockout. [0]- 1b=Provides intrusion |
| 2 | Chassis FRU Info Device Address (see Get Chassis Capabilities for a description of these addresses, their use, and the field formatting.) |
| 3 | Chassis SDR Device Address |
| 4 | Chassis SEL Device Address |
| 5 | Chassis SM Device Address |
| (6) | Chassis Bridge Device Address |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code. Note, this command does not return an error completion code if an attempt is made to change a 'read-only' parameter Software must check which fields in the response match the value from the request by using the Get Chassis Capabilities command |
Command Example
Set the chassis function.
Request:
bash
ipmicmd -k "0f 00 MM NN" smi 0Response:
text
0f MM NN