Get Message
更新时间： 2026/08/06
在Gitcode上查看源码Get Message
Change History
| openUBMC Version | Revision Date | Description |
|---|---|---|
| 25.06 | 2025/06/26 | Initial draft: add command details |
Basic Information
Function Description
Obtains messages.
Privilege
Command Information
Request Information
| Byte | Data Field |
|---|---|
| NetFn | App 06h |
| CMD | 33h |
Response Information
| Byte | Data Field |
|---|---|
| 1 | Completion Code generic, plus following command specific completion code: 80h=data not available (queue/buffer empty) Implementation of this completion code is Mandatory. The code eliminates the need for system software to always check the Message Buffer Flags to see if there data left in the Receive Message Queue. If a non-OK, non-80h completion is encountered-software will need to check the Message Flags to get the empty/non-empty status of the Receive Message Queue |
| 2 | Channel Number [7:4] Inferred privilege level for message When the BMC receives a message for the receive message queue, it assigns an 'inferred privilege level' to the message as follows: If the message is received from a session-based channel, it will initially be assigned a privilege level that matches the 'maximum requested privilege level' that was negotiated via the Activate Session command |
| 3:N | If per-message authentication is enabled, but User-level authentication is disabled, the BMC will assign a level of 'User' to any messages that are received with an Authentication Type=none. (Note that per-message and user-level authentication options only apply to multi-session channels.) The BMC will then lower the assigned privilege limit, if necessary, based on the present session privilege limit that was set via the Set Session Privilege Level command If the channel is session-less (e.g. IPMB), the BMC will return 'None' for the privilege level 0h=None (unspecified) 1h=Callback level 2h=User level 3h=Operator level 4h=Administrator level 5h=OEM Proprietary level [3:0] channel number Message Data. Max. Length & format dependent on protocol associated with channel |
Command Example
Obtain a message.
Request:
bash
ipmicmd -k "0f 00 MM NN" smi 0Response:
text
0f MM NN