文档中心
ipmcget -t storage -d arrayinfo
更新时间： 2026/07/28
在Gitcode上查看源码

Back to Overview

Command Function ​

Get the information of disk array

Command Format ​

ipmcget -t storage -d arrayinfo -v <ContollerID> <Option>

Command type ​

ipmcget

Parameters ​

NameTypeRequiredDefaultConstraintDescription
ContollerIDintegerYes-Type: Range; 0, 255RAID Controller ID (An non-negative integer base 0). eg. 0,1,2...
Option-Yes--all - Show all disk arrays attached to this RAID controller. ID - Show only one disk array which matches with this ID.

Example ​

ipmcget -t storage -d arrayinfo -v 0 all
ipmcget -t storage -d arrayinfo -v 0 0

Output Examples ​

:
None
N/A
Disk Array Information
Array ID                                 : <value>
Used Space                               : <value>
Free Space                               : <value>
Free Blocks Space                        :
Logcial Drive(s) ID                      :
Physical Drive(s) ID                     :
----------------------------------------------------------------------

Config source ​

interface_config/cli/ipmcget/storage.json